Bearing Failure Optimization of Composite Double-Lap Bolted Joints Based on a Three-Step Strategy Marked By Feasible Region Reduction and Model Decoupling

To minimize the mass and increase the bearing failure load of composite doublelap bolted joints, a three-step optimization strategy including feasible region reduction, optimization model decoupling and optimization was presented. In feasible region reduction, the dimensions of the feasible design region were reduced by selecting dominant design variables from numerous multilevel parameters by sensitivity analyses, and the feasible regions of variables were reduced by influence mechanism analyses. In model decoupling, the optimization model with a large number of variables was divided into various sub-models with fewer variables by variance analysis. In the third step, the optimization sub-models were solved one by one using a genetic algorithm, and the modified characteristic curve method was adopted as the failure prediction method. Based on the proposed optimization method, optimization of a double-lap single-bolt joint was performed using the ANSYS^® code. The results show that the bearing failure load increased by 13.5% and that the mass decreased by 8.7% compared with those of the initial design of the joint, which validated the effectiveness of the three-step optimization strategy.     

煤矿生产、安全调度LED电子大屏幕显示系统的设计

通过比较煤矿生产、安全调度显示方式的优缺点，提出和分析了适合于煤矿生产安全调度的ＬＥＤ电子大屏幕显示系统配置、功能及特点。     

地球物理与中国的可持续发展

在20世纪中国的发展历程中,地球物理在资源探查、环境保护和减轻自然灾害服务等诸多方面发挥了举足轻重的作用。21世纪,中国走可持续发展之路已成为必然选择。随着可持续发展思想及内涵的逐渐丰富,地球物理必将为中国的可持续发展起到更大作用。     

H2S optimization for lignite liquefaction

Two lignite samples, Beulah No. 3 and Big Brown No. 1, were liquefied at 420 °C using H₂ and synthesis gas to determine the optimum beneficial amount of H₂S in the batch autoclave reactor. Under the conditions employed, 50–100 psi partial pressure of H₂S, nominally 4–10 wt% of daf lignite, was optimum for both samples. Synthesis gas outperformed H₂ with and without H₂S for the liquefaction of the two coals.     

光缆CATV用DFB激光器发射组件

介绍了国内首次研制的光缆ＣＡＴＶ用１．３μｍＤＦＢ激光器组件。组件工作频带达到１ＧＨｚ，带内起伏〈１ｄＢ，组件的ＲＩＮ〈－１５３ｄＢ／Ｈｚ；出纤光功率〉２ｍＷ，载噪比ＣＮＲ〉５０ｄＢ。首次实现用低反射尖锥端光纤的ＤＦＢ激光器耦合。     

链烷烃的表面张力与内压

对Ｄａｖｉｓ和Ｒｏｓｓｅｉｎｓｋｙ提出的关系检验表明，液体的表面张力σ与Ｐ１Ｖｍ１／３之比不仅取决于温度，还与液体的种类有关，据此，建立了一个能由链烷烃的分子结构准确预测其表面张力的方法。     

电子商务中SET协议的安全缺陷研究

目前SET协议在电子商务交易中应用越来越广泛,因此,对SET协议的安全性的要求就越来越高。论文在SET协议的交易流程基础上,分析了其安全机制采用的技术和优点,指出了SET协议安全性存在的一些问题。     

自密实高性能混凝土在结构工程中的应用

对外经济贸易大学学生公寓楼工程,建筑面积93 628 m2,地下二层,地上十层,剪力墙结构,其中消防通道部分框架—剪力墙体系,主框架梁跨度13m,截面600 mm×2700,框架柱截面为800mm×1300,剪力墙厚度为250mm,根据结构构件的特点该部位墙、柱、梁均采用C60自密实高性能混凝土约450m3。     

CZF90测井中子发生器使用寿命浅谈

Ｃ／Ｏ测井中采用同步测量技术来分析非弹性γ与俘获γ，但在一些ＭＳＩ Ｃ／Ｏ测井中发现非弹性γ的一小部分或一大部分超前于非弹性门而进入俘获门，我们把这一问题叫做“错位”。“错位”使得Ｃ／Ｏ的ＣＩ值不正常，测井曲线不合格。这样的仪器不能用来测井。吉林油田测井公司碳氧比维修班成功地解决了Ｃ／Ｏ仪器“错位”等技术难题，在该油田所使用的ＣＺＦ９０－９４－０９发生器已测井８８口，累计打靶时间２３０ｈ，并且至今